Bose Lifestyle 18 Series II Instrukcja instalacji - Strona 31

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System kina domowego Bose Lifestyle 18 Series II. Bose Lifestyle 18 Series II 36 stron. Dvd home entertainment system
Również dla Bose Lifestyle 18 Series II: Instrukcja obsługi (44 strony), Instrukcja instalacji (42 strony), Instrukcja obsługi (25 strony), Instrukcja obsługi (24 strony), Instrukcja obsługi (13 strony), Podręcznik szybkiej konfiguracji (3 strony), Instrukcja obsługi (44 strony)

Bose Lifestyle 18 Series II Instrukcja instalacji

Other jacks on the media center panel

Connecting an optional antenna extender

If your remote control does not communicate with the media center, the batteries may need
replacement or it may be out of transmission range. To extend the range, plug an antenna
extender, which may be purchased at an authorized Bose
media center. See Figure 27 on page 30.

Connecting the optional IR emitter cable

The IR (infrared) emitter cable is designed for optional use when a particular component does
not respond to LIFESTYLE
connected to the media center, but placed where it cannot receive the IR signals from the
media center. The IR emitter can be placed next to one component only. See Figure 27 on
page 30.
To use the emitter:
1. Insert the 3.5 mm plug into the IR EMITTER jack on the media center panel.
2. Place the flat side of the other end of the cable near the unresponsive component so that
the remote control signals reach that component.
Note: Refer to "Controlling external sources" in your LIFESTYLE
details on how to program the LIFESTYLE
component.
3. Confirm that IR signals now work to control that component. Move the emitter around, as
necessary, to find the best position.
4. Use the double-sided tape enclosed with the emitter to affix it in the proper position.
Note: If you have questions, or need to obtain a replacement emitter, contact Bose customer
service. Refer to the Bose address list included with your system.

Data port for system backups

Some systems will have a data port for future use. See Figure 27.

Serial data jack

This jack is for factory and service use only.
®
system remote control commands. That is, the component is
®
system remote so that it works with your other
Reference
®
dealer, into its connection on the
®
system Operating Guide for
31