Bose SoundTouch Stereo JC series II Instrukcja obsługi - Strona 16
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Konwerter mediów Bose SoundTouch Stereo JC series II. Bose SoundTouch Stereo JC series II 36 stron. Wi-fi music system
Również dla Bose SoundTouch Stereo JC series II: Skrócona instrukcja obsługi (2 strony)
Drukuj stronę
Setting up the System
Connect the speakers
What you need:
Acoustimass
Module
®
Note: See "Appendix A: Acoustimass
1.
Lay the Acoustimass
the L (gray) connector on the Acoustimass
2.
Insert the other end of the L (gray) speaker cable into the left speaker
connector, with the label facing down.
3.
Insert the R (blue) speaker cable into the R (blue) connector on the
Acoustimass
4.
Insert the other end of the R (blue) speaker cable into the right speaker
connector, with the label facing down.
5.
Reconnect the Acoustimass
Acoustimass
Note: You can place system speakers on wall brackets, table stands or floor
stands. To purchase these accessories, contact your local Bose
visit www.Bose.com.
16 - English
module on its side. Insert the L (gray) speaker cable into
®
module.
®
module power cord to AC (mains) power.
®
module
®
Speaker cables
connector panel" on page 31 for details.
®
module.
®
Left (L, gray)
Right (R, blue)
Right speaker
Left speaker
dealer or
®