DS Produkte 09120 Instrukcje - Strona 2

Przeglądaj online lub pobierz pdf Instrukcje dla Oświetlenie zewnętrzne DS Produkte 09120. DS Produkte 09120 4 stron. Solar lights

Drukuj stronę

Dear Customer,

We are delighted that you have decided on purchasing our solar

lights. If you have any questions, please contact the customer

service department via our website: www.dspro.de/kontakt

Explanation of Symbols and Signal Words

Safety instructions: Read these carefully and follow

them to prevent personal injury.

Circuit symbol for direct current

Read instructions before use!

WARNING warns of possible serious injuries and danger to life

CAUTION

warns of slight to moderate injuries

Important Instructions

CAUTION – Danger of Injury!

■

The articles are not a toy. Do not leave children and animals

unsupervised with the articles, in order to avoid injuries!

■

Danger of Burns from Battery Acid! If a battery leaks, avoid

physical contact with the battery acid. Wear protective gloves

if necessary. If you touch battery acid, rinse the affected area

with abundant fresh water immediately and contact a doctor as

soon as possible.

■

The solar lights are designed to decorate outdoor areas. The

storage batteries charge during the daytime via the solar cell

ﬁ elds. The accumulated energy allows the LEDs to illuminate

at night.

■

The articles are designed for personal domestic use only and

are not intended for commercial applications.

■

The articles should only be used as described in these instruc-

tions. Any other use is deemed to be improper.

■

Protect the articles from naked ﬂ ames and impact.

■

Never immerse the articles in water or other liquids. They are

only resistant to splashing.

■

During extreme weather conditions (e.g. storm, hail) or if the

articles will not be used for a long time, switch them off and

store them in a dry place.

■

Do not disassemble the articles (except for removing the stor-

age battery prior to disposal of the solar unit)! Have any repairs

done only by a specialist workshop or the customer service

department. The LEDs cannot be replaced.

■

Storage batteries may not be disassembled, disposed of in

ﬁ re, immersed in liquids or short circuited.

■

Keep the solar ﬁ elds clean so that the greatest possible ab-

sorption of light is ensured. Wipe down the solar ﬁ elds (and if

necessary also the remaining components of the article) with a

damp cloth. Do not use any corrosive or abrasive cleaning

agents to clean the article! They could damage the surfaces.

Items Supplied

WARNING – Danger of Suffocation! Keep children

and animals away from the packaging material.

4 x solar lights

4 x ground spikes (consisting of two parts each)

4 x adhesive strip

1 x instructions

Check the items supplied for completeness and transport dam-

age. If you ﬁ nd any damage, do not use the articles (!), but rather

contact the customer service department.

DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •

*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.

Article number: 09120

Overview

Switching on and off

1. Slide the On / Off switches to the ON position to activate the

solar units.

The batteries can now charge up in daylight. When darkness

sets in, the LEDs automatically switch on. When it gets light,

the LEDs switch off and the batteries are charged up via the

solar ﬁ elds.

2. When the solar lights are not being used switch them off by

sliding the On / Off switches to the OFF position.

Set-up

The solar lamps should not be placed near to other light sources

such as street lamps or other lamps, so that the LEDs can be

switched on automatically.

Position the solar lights so that the solar ﬁ elds are able to ab-

sorb direct sunlight the whole day preferably. They can either be

attached by means of the adhesive strips or anchored with the

ground spikes in the ground.

•

Before using the adhesive strips switch the solar units on

and clean the surfaces. To ensure that the adhesive strips ad-

here well, the surfaces must be clean, free of dust and grease.

•

Mount the ground spikes as follows:

Technical Data

Model number: D-DL08

Article number: 09120

Power supply:

Charging time: approx. 6 to 8 hours (in sunlight)

Lighting time:

ID Instructions: Z 09120 M DS V1 1018

Disposal

The packaging material is recyclable. Dispose of the pack-

aging in an environmentally friendly manner and take it to a

recycling centre.

These articles are governed by the European Directive

2012/19/EU on waste electrical and electronic equipment

(WEEE). Do not dispose of these articles as normal domes-

tic waste, but rather in an environmentally friendly manner

via an ofﬁ cially approved waste disposal company.

Batteries should be removed before the articles are dis-

posed of and should be disposed of separately from the

articles at suitable collection points.

Removing the storage battery

Loosen the screws of the solar unit and remove the cover. After-

wards, you can remove the storage battery.

Customer Service / Importer:

1 Solar ﬁ eld

2 LEDs

3 Solar unit (including storage

battery) with On / Off switch

on the underside

4 Ground spike

3. Insert the ground spikes into each other:

Slide one piece with a long slot (A) and a

piece with a short slot (B) into each other.

4. Mount the ground spike on the underside of

the solar unit.

5. Push the ground spikes into the ground.

1.2 V DC (1x Ni-Mh storage battery, 400 mAh, AA)

up to 8 hours (with a fully charged storage battery)

✆

+49 38851 314650 *)

Instructions