Anslut 014242 Instrukcja obsługi - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wentylator Anslut 014242. Anslut 014242 20 stron.

Drukuj stronę
Anslut 014242 Instrukcja obsługi
• Do not use the product near
a bath, shower or swimming
pool.
• Do not expose the product to
direct sunlight.
• Do not use product together
with an external speed
controller.
• Do not use the product near
flammable liquids or gas.
• Switch off the product and
pull out the plug before
cleaning.
• Never leave the product
unattended when switched
on.
• Repairs must only be carried
out by an authorised service
centre.
• If the product stops working
properly, switch it off with
the switch on the control
panel and contact the
retailer.
SYMBOLS
Read the instructions.
Safety class II.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.

TECHNICAL DATA

Rated voltage
Input power
Safety class
ASSEMBLY
1.
Remove all the parts of the product from
the packaging.
FIG. 1
2.
Fit the two parts of the foot together.
Pull the cord through the slot in the foot
(A) and put the foot on the fan unit.
FIG. 2
3.
Lock the foot on the fan unit with the
plastic nut.

HOW TO USE

1.
Plug the plug into a suitable power point.
2.
Press the oscillation button OSC (2)
to activate oscillation. Press again to
deactivate oscillation.
FIG. 3
3.
The timer can be set up to 120 minutes.
EN
230 V ~ 50 Hz
45 W
II
17