ANSMANN Starlight Series Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Latarka ANSMANN Starlight Series. ANSMANN Starlight Series 10 stron.

Operating Instructions

ANSMANN Starlight Series

Starlight 200 (UK) and Starlight 400 (UK)

(Starlight 300 – no longer available)

Page 2

FOCUS

You can adjust the focus by turning the zoom grip (4). Turning the zoom grip fully clockwise will cause the bulb

selected by (1) to flash on and off.

REPLACING THE BULB

Press the rubber ring of the reflector at the two tabs (10). The reflector/lens can now be taken out of the lamp

case and the bulbs can be replaced.

ACCESSORIES

Starlight 300 and 400 are supplied with a shoulder strap. It can be fastened to the two fixings on the upper sides

of the case.

Starlight 400 is supplied with two coloured filter slides (red and green). The power pack case provides storage

for the two slides.

Starlight 400 has a mains-failure detection option. This means that the lamp will automatically switch on if it

detects that there is a mains failure, to provide a safety light. When the lamp is placed into the wall bracket for

charging with the light on, the bulb extinguishes. If it detects a mains failure, the bulb will light until the mains

power is restored and the power pack is being charged again.

REMOVAL OF THE RECHARGEABLE BATTERY PACK (8)

Depress the two release positions (6) at the same time to remove the power pack.