Elite Acoustics Engineering D6-8 MKII Skrócona instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Wzmacniacz Elite Acoustics Engineering D6-8 MKII. Elite Acoustics Engineering D6-8 MKII 10 stron. 80w lithium battery powered acoustic amplifier with 6 channels, digital mixer & effects, and bluetooth
Drukuj stronę
Channel 5/6
Level [26]: Level control
Left (Mono) [16]: 1/4" balance TRS input
Right [17]: 1/4" balance TRS input
Aux
Aux Send Level [18]: Aux output level control
Aux Send 1 [19]: 1/4" balance TRS output
Aux Send 2 [20]: 1/4" balance TRS output
Monitor Output: Connect with extra speakers/monitors
Monitor Right Output [21]: Connect to another speaker using 1/4" TRS
Output Source [22]: Select either Main Mix or Direct Output for Chan 1 & 2
Main Output [23]: XLR Left/Right Output
MIDI: MIDI IN/OUT [24]: 5 PIN DIN connectors for MIDI controllers
Battery Switch[25] : Battery Slide Switch to preserve battery life for storage or transit
Connect: Enable battery power when using unit
Disconnect: Disable battery power when storing unit to preserve battery life
•
To turn ON/OFF Bluetooth® function
PRESS/HOLD down MODE button for approximately 5 seconds
•
To pair device to the speaker system
Bluetooth® needs to be turned ON
QUICK TAP the MODE button once
BLUETOOTH® FUNCTION
Both LEDs will flash at the same time
Both Flashing LED: indicate Bluetooth
Flashing Blue LED only: indicate Bluetooth
is ready to be paired
®
is connected
®