Duerkopp Adler 550-12-12 Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Maszyna do szycia Duerkopp Adler 550-12-12. Duerkopp Adler 550-12-12 15 stron.
Również dla Duerkopp Adler 550-12-12: Instrukcja instalacji (6 strony)

Drukuj stronę

Duerkopp Adler 550-12-12 Instrukcja obsługi

2.5.6 Replacing the pressure foot

Caution Risk of Injury!

Turn the main switch off.

Replace the pressure foot only with the machine turned off.

The three exchangeable pressure feet available as optional equipment

make possible a working of three different selvedge tape widths

(1,5 mm, 2,0 mm and 3,0 mm)

Dependet on the selvedge tape used, the corresponding pressure foot

and the wider tape guide B must be mounted.

–

Remove the needle.

–

Carefully pull the compressed air supply 2 from pressure foot 3.

–

Loosen mounting screw 1 and replace pressure foot 3.

–

Tighten mounting screw 1 again.

–

Carefully plug the compressed air supply 2 onto pressure foot 3.

–

Insert the needle again.

–

Set the optimum compressed air supply for the new selvedge tape

width at regulating screw 4 through sewing trials.