Duerkopp Adler 550-12-12 Instrukcja obsługi - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Maszyna do szycia Duerkopp Adler 550-12-12. Duerkopp Adler 550-12-12 15 stron.
Również dla Duerkopp Adler 550-12-12: Instrukcja instalacji (6 strony)

Drukuj stronę

Duerkopp Adler 550-12-12 Instrukcja obsługi

Checking the oil level in the oil reservoir of the maintenance unit

–

The oil level in oil reservoir 5 should not drop below the groove

marking.

–

If necessary, fill oil up to the groove marking.

–

For this completely shut off the compressed air by turning the knob

1 to the left.

–

To fill screw out the oil fill screw 3.

–

After filling with oil set an operating pressure of 6 bar by pulling up

the knob 1 and turning it to the right.

The set operating pressure can be seen on the pressure gauge 4.

Checking the oil flow of the oil mister

–

Under operating pressure a drop of oil should drip out of the tube

under viewing glass 5 after about 10 work cycles.

–

Regulate the strength of the thus created oil mist with the setting

screw 2.