Anzzi SD-AZ8076-01 Series Instrukcja instalacji i obsługi - Strona 14
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Produkt hydrauliczny Anzzi SD-AZ8076-01 Series. Anzzi SD-AZ8076-01 Series 16 stron. Glass shower door
Drukuj stronę
6
1.
Carefully remove the Corner Protectors from the Door Panel [07] and attach the
Hinge-Side Vinyl Seal [06] to the side of it. (Fig 6.1)
2.
Make sure the Hinge-Side Vinyl Seal [06] is 0.1" above the Deck and the Flange of
the Hinge-Side Vinyl Seal [06] is behind the Fixed Panel [01]. (Fig 6.1, Fig 6.2)
3.
If the Hinge-Side Vinyl Seal [06] is longer than the Door Panel [07] after installation,
cut it to correct length. (Fig 6.3)
4.
Attach the Bottom Water Proof Strip [09] to the bottom of Door Panel [07] close to the
Hinge-Side Vinyl Seal [06]. The Flange of the Bottom Water Proof Strip [09] faces
inside. (Fig 6.1)
5.
If the Bottom Water Proof Strip [09] is longer than the Door Panel [07] after installation,
cut it to correct length. (Fig 6.4)
12
6