AODELAN FT-8T Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria do kamer AODELAN FT-8T. AODELAN FT-8T 13 stron. Wireless flash trigger

Connecting a flash to the FT-8 Receiver hot

shoe

1. Turn off the flash and the FT-8 receiver.

2. Slide the flash into the receiver's hot shoe mount.

3. Lock the flash with the flash's locking mechanism.

4. Turn on the flash and the FT-8 receiver. *

5. Set the flash to Manual mode.

Connecting a flash/strobe to the FT-8

receiver by sync cable

1. Turn off the flash/strobe and the FT-8 receiver.

2. Connect a cable to the receiver's 3.5 mm Sync

Port.

3. Connect the opposite end of the cable to a flash

or studio strobe (a 6.3 mm adapter is included for

studio strobes with larger ports).

4. Turn on the flash/strobe and the FT-8 receiver. *

5. Set the flash/strobe to Manual mode.

* It is not unusual for the flash to discharge once after

turning on the FT-8

• 6 •