AOM K90 Instrukcja użytkowania i konserwacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja użytkowania i konserwacji dla Rozpylacz farby AOM K90. AOM K90 16 stron. Airless gun

USE AND MAINTENANCE MANUAL

3.1

INSPECTION OF PURCHASED PRODUCT

Inspect the equipment before its use to check for damages caused by transportation or

improper storage. Make sure that all standard and optional components have been delivered.

3.2

The gun must be fed with a maximum pressure of 500 bar (7100psi).

To mount the equipment proceed as follows (use the drawing below):

Fasten the paint inlet hose to the gun connection (A).

Choose which nozzles and gun filter better adapt to

the operation which must be performed.

WARNING

Always use high pressure hoses to carry out all the

connections. Before you start using the equipment, make

sure the connections and hoses are in perfect working

conditions, that is without holes, bends or splits.

WARNING

Always operate with the minimum pressure needed to

obtain the results desired. Increasing pressure does not

improve the painting quality, on the contrary it can wear

the nozzle.

WARNING

If the spraying rate is not optimal, do not increase the

paint pressure, but replace the tip with a larger-size one.

3.3

Painting operations

MUST

be carried out in an appropriate booth equipped with a filtering

system. Do not use the unit if the filtering system is not activated. Always wear protection

gloves, goggles, breathing filters with active carbon and adequate clothing for the protection

of the entire body. Ground all the unit components (using the given cable) because static

currents could create sparks and explosions. All the equipment standard hoses are made of

antistatic material.

(1)

(2)

(3)

(A)

Page 10 of 14