AOR LA400 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Antena AOR LA400. AOR LA400 14 stron. Magnetic loop antenna
Również dla AOR LA400: Broszura i specyfikacje (2 strony)

Drukuj stronę

◎ Peak the received signal by turning the TUNING knob slowly to either the left or the right.

The white dot on the tuning know helps you to see the approximate location of the tuning.

For your reference, when the dot is on top as on the above illustration, the tuning PEAK

is approximately in the middle of the selected band.

For example for band switch position 3 (3MHz to 10MHz), it would be roughly peaked on

6.5MHz.

Tuning is most critical above 3MHz. For best performance of LA400 and optimal

reception conditions, make sure the selected band is appropriate for the received

frequency, and search for the signal peak with the tuning know.

◎ A loop antenna is very directional. Rotate the loop element until your receiver's signal

strength meter (S-meter) deflects to maximum and the incoming signal sounds clearest.

If your receiver does not have an S-meter, simply adjust for maximum received signal.

Rotate the loop element until the signal is strongest and any interfering signal is nulled.