AudioCodes RXV81 Skrócona instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla System konferencyjny AudioCodes RXV81. AudioCodes RXV81 8 stron. Collaboration bar
Również dla AudioCodes RXV81: Podręcznik wdrażania (10 strony)
Drukuj stronę
5. Cabling
The RXV81 connector ports are located on its rear panel, as shown below:
L-R
Description
Use the supplied HDMI Out cable to connect this port to a display (standalone mode).
Applies to RXV81 as a standalone device (default). Video and sharing are presented on the
display. Meetings are controlled via the RC-RXV and/or RX-PAD.
Power on / Reset button.
To restart RXV81, press and hold
Not applicable
-
USB type-A port to connect to touch-capable room display.
Ethernet LAN GbE port to connect RJ-45 terminals.
USB type-C to connect to a Bring-Your-Own-Device (BYOD) computer running a Unified
Communication (UC) client for ad hoc or full peripheral mode.
DC power input port for the 12V power supply adapter.
12V-3A
6. Connecting RXV81 as a USB Peripheral
You can connect RXV81 to a peripheral to Bring-Your-Own-Device (BYOD) computer running a UC client for
ad hoc or full peripheral mode. In peripheral mode, the BYOD displays the meeting video and content.
Meetings are controlled via the BYOD (join, accept, manage participants). Audio/video (camera ePTZ, mic
mute) can be controlled from the UC client, RC-RXV, and/or RX-PAD (camera on / off, mute, volume).
For RX-PAD Meeting Room Controller:
Make sure that the RX-PAD and RXV81 are connected to the same network.
For Wi-Fi connectivity, make sure that RX-PAD is powered by the supplied AC/DC power adaptor.
for at least 2 seconds.
P a g e
| 4