Daniels 844.BLU.PLOW Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odśnieżarka Daniels 844.BLU.PLOW. Daniels 844.BLU.PLOW 16 stron. 3-in-1 plow
PLOW INSTALLATION
3. Electric switch installation
harness has been pre assembled prior to shipping.
Prior to installing the electric wire harness and switch
by connecting the electrical connector plug to the
to the cab. Make sure the wire will not be pinched
when the plow is raised, lowered, or hydro turned.
Secure the wire with nylon zip ties as needed (Page
is not pulled or stretched during operation.
Use existing clamps along the boom arm or nylon zip
ties to secure the wire to the boom. Pay particular
lowered. Also, be sure to allow enough slack that
or movement between the machine body and the
electrical plug to the pre assembled plow harness at
installation process. Cover both connectors with
entering the electrical system.
Operator's Manual
a boot along the steering column, or through a hole
be drilled, select an area with no obstruction, on either
edges.
Install the black switch box in the cab. Install in a
that the switch box be mounted in a location which
machine. Use heavy duty two sided tape or a mounting
strap to mount the switch in the desired location.
to the installed switch. Keep the wire within the cab
routed behind the dash, wall, and door panels where
possible. Loose, exposed wire that is not properly
secured can be damaged or become tangled with the
white ground wire to a ground post or mounting screw
connectors are placed in a tool box or compartment
while the plow is installed on the machine. This will also
3-IN-1 PLOW
3