Danish Interpretation Systems DCS 6000 Podręcznik użytkownika - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System konferencyjny Danish Interpretation Systems DCS 6000. Danish Interpretation Systems DCS 6000 18 stron. Digital conference system
Również dla Danish Interpretation Systems DCS 6000: Podręcznik użytkownika (19 strony), Podręcznik użytkownika (10 strony), Podręcznik użytkownika (14 strony), Podręcznik użytkownika (14 strony), Podręcznik użytkownika (13 strony), Podręcznik użytkownika (14 strony)

Drukuj stronę

Danish Interpretation Systems

If one of the buttons is held down for more than one

second the channels will scroll through the

languages with a speed of 2-4 languages per

second.

Only the number of channels set at the Channel Set-

up menu at the CU 6010 can be selected and shown.

The numbers will always be in succession from 1

and up. The same is the case for the CS 6032

channel selectors, with the exception, that the CS

6032 is also showing channel 0 (floor)

Showing quality of Incoming language

To the right of the four a-d language abbreviations

of the quality of the source is shown.

If there is no interpretation at the channel (Floor

audio is present) then "FLOOR" will be shown.

When there is an interpreters set switched on to the

channel where the interpreter is listening to Floor,

then a quality indication "+" is shown.

When an interpreter's set is switched on to the

channel where the interpreter listens to another

channel whose interpreter listens to Floor, a quality

indication "-." is shown. This is indication one relay

interpreting.

Brought one level further, a quality indication "- -."

is shown. This is indication for double or more

relay interpreting

When interpreting on the A-language and the A-

language of the Interpreter Set is selected, then

"FLOOR" will be shown, preventing that the

interpreter hears himself. For testing purpose, the

corresponding a, b, c or d button can be pressed for

3 seconds the listening audio will then switch to the

interpreter himself and the quality indication change

to "SELF". When releasing the button, the listening

audio will switch back to Floor and the quality

indication changes to "FLOOR" again.

If the A-language is not selected the quality

indication "SELF" is shown

All a-d selections show the actual quality of the

channels at all times.

Manual 01 18 04445, Printed in Denmark, 02/2003 CHN

Selection of Outgoing channel

The two push buttons A and B are used to select

whether the interpreter will be routed to the A- or

B-outgoing channel.

When A is pressed the red LED is lighted in the

button. When B is pressed the light in the A-button

will go out and the red LED in the B-button will

light up.

The A-lines will always show the language of the

one selected for the Interpreter Set. The upper line

at the left shows the channel number and the lower

line shows the languages in full name in accordance

to the language list supported (max. 10 char.).

When the system is initialised and set up then the

A-display will show the booth languages and A is

automatically selected. B-display will show the B-

language selected at the B-language Set-up

When B is pressed the light LED in the button is lit.

It is now possible to change the selection of the B-

language channel with the B-select push buttons up

and down if the B-mode is set to "All" in the B-

language setup menu.

The B-selection will only function when B is

selected and the Microphone is not switched On.

Microphone on/off

When the push button is pressed the microphone

audio is put on to the outgoing channel; the LED's

in the button and the lamp of the microphone are lit

up. If another interpreter already occupies the

outgoing channel nothing will happen.

When the push button again is pressed the sound

from the microphone, the button LED's and

microphone lamp is switched off.

Mute

The button will switch off the audio from the

microphone to the outgoing channel while it is

depressed (the channel is muted). Also the light ring

in the microphone is switched off while depressed.

When the button is released the microphone audio

is switched on again and the light ring in the

microphone is switched on.

User Manual