Danish Interpretation Systems DCS 6000 Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System konferencyjny Danish Interpretation Systems DCS 6000. Danish Interpretation Systems DCS 6000 14 stron. Digital conference system
Również dla Danish Interpretation Systems DCS 6000: Podręcznik użytkownika (19 strony), Podręcznik użytkownika (10 strony), Podręcznik użytkownika (14 strony), Podręcznik użytkownika (14 strony), Podręcznik użytkownika (13 strony), Podręcznik użytkownika (18 strony)

Danish Interpretation Systems

System design

There are no settings to be done on the RP 6004

Repeater.

However it is important to observe, that the unit is

only repeating one of the chains on the CU 6010

Central Unit.

And as so, the specification, which applies to each

of the chain outputs on the CU 6010 Central Units

does also apply to all the repeated outputs in total.

So when designing a system to incorporate RP 6004

Repeaters, bare in mind, that as the RP 6004

'Repeated chain' connector

When connecting the RP 6004 Repeaters to the CU

6010 the first EX is connected to the 'Loop

through' connector. The next RP 6004 Repeaters

can be connected to either the other 'Loop through'

connector or to one of the 'Repeated out'

Repeater is repeating only one of the four outputs A

(A1 or A2) or B (B1 or B2) the max. number of

languages configured on the four outputs (1, 2, 3

and 4) is totally max. 16.

If more languages are required, Interpreter sets for

those languages have to be connected either to an

other RP 6004 Repeater, which is connected to the

other of the two chains (A or B) on the CU 6010, or

directly to the other of the two chains (A or B) on a

CU 6010.

connectors. If using the 'Repeated' outputs two

more RP 6004 Repeaters can be connected

extending the maximum cable length in one chain

up to 680 m. The above schematic is showing the

connection using the ''Repeated out' connectors.

Manual 01 18 04466 Printed in Denmark

Appendix