Abus PLBW10100 Podręcznik - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik dla Czujniki bezpieczeństwa Abus PLBW10100. Abus PLBW10100 18 stron. Nexello motion detector
Również dla Abus PLBW10100: Skrócona instrukcja obsługi (2 strony)

Drukuj stronę

2.4. Resetting to factory settings

2.5. Wake-up / Waking up the device

Press and hold the Link button for at least 5 seconds.

Release the button when the red LED stops blinking

and lights up continuously. The device is now reset to

factory settings.

Hint:

Please use this procedure only if the primary network

controller is missing or otherwise not functional.

If the device is set to factory default, the status is set

to "not included" and the association settings and

possible configurations are reset to default.

Press the Link button once to wake up the device. It

will then establish a connection to the Z-Wave

controller and transmit the current status.

English