Datamax H-Class Podręcznik - Strona 12
Przeglądaj online lub pobierz pdf Podręcznik dla Drukarka Datamax H-Class. Datamax H-Class 14 stron. Cutter option
Również dla Datamax H-Class: Podręcznik (8 strony), Skrócona instrukcja obsługi (12 strony), Podręcznik (10 strony), Podręcznik (12 strony)
Drukuj stronę
D) Place the Cover Plate (Item 2) onto
the Card Cage, as shown, then
install and tighten the two Screws
(Item 3) to secure the plate.
Step 3: Interfacing
Interface the card according to your application requirements (see the drawing below for
connector pin-outs, refer to Step 1 for signal details) as follows:
A) For GPIO functions connect a GPI/O interface cable to the GPI/O A (J1) and / or GPI/O
B (J2) ports.
B) For RS232 communications connect a serial interface cable to COM C (J4) and / or COM
D (J3); for dedicated devices, connect the cabling from that device to COM C (J4).
Note: If using both the RFID and Linear Scanner, see Configuring Hardware
Settings, above.
C) Connect the AC power cord to the printer and then turn the power switch ON.
5
15
10
4
14
9
3
J2
13
8
2
12
7
1
11
6
5
9
4
8
3
J4
7
2
6
1
10
8
15
7
14
6
13
5
J1
12
4
11
3
10
2
9
1
1
J3
8
Card Cage
Cover Plate
Screws