Datamax E-Class Mark III Skrócona instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Czytnik kodów kreskowych Datamax E-Class Mark III. Datamax E-Class Mark III 7 stron. Paper menu
Navigating the Paper Menu
An item must be selected before it can be changed. Because the location within the Paper Menu structure
depends on the number of button presses and the amount of time between them, it is recommended that
button presses and pauses be noted before editing is attempted, at least until the system is completely
familiar.
To move through the menu:
Desired Effect
Move down one item
Select item and enter
edit mode
Edit the option
Exit edit mode, return
to selection mode
Make no changes,
return to selection
mode
Operator Action
Briefly press and release
the button
Wait 2 seconds
Within 10 seconds, briefly
press and release button
Wait 10 seconds
Do not press button after
entering edit mode
Printer's Response
Left LED flashes orange; focus moves one
item down the list.
Note: When selection mode is first entered,
the first button press selects menu Item 1.
LEDs light in sequence indicating currently
selected option; enters edit mode.
For each button press, cycles through
settings and LED states.
Option setting is written to printer; printer
returns to selection mode at top of menu.
Left LED flashes green at 1 second intervals.
Option setting is unchanged; printer returns
to selection mode at top of menu. Left LED
flashes green at 1 second intervals.
5