ADE LW300T Series Instrukcja obsługi - Strona 14
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wagi ADE LW300T Series. ADE LW300T Series 20 stron. Electronic, price-computing retail scales
Error messages
Failure
Current weight exceeds the zero
ERR 4
range of the scale
ERR 5
Keypad fault
Load cell is defective or not
ERR 6
connected.
Weighing result unstable due to
draughts, air movement or
Err 9
vibrations.
Load cell is defective.
Current weight exceeds the
Err 19
permissible range for automatic
zeroing when switched on.
Zero range or weighing capacity
--oL--
exceeded
-- UL --
Underload (-20d)
Storage and Transport Conditions
Keep all original packaging materials for a possible return of the scale to avoid damage in
transit. Disconnect all cables before transport and switch off the scale to avoid damage.
Disposal
Waste electrical equipment do not belong in household waste. Devices
with this marking may not be disposed of as residual waste, but must
be recycled.
Remove (if possible) all batteries and rechargeable batteries from the
devices and send them to the battery disposal.
Make sure that only depleted batteries or batteries with insulated poles
are disposed of so that there is no short circuit!
Warranty
ADE will repair or replace this product if evidence is provided that it has failed within 1 year from
the date of sale (proof of purchase is required) due to lack of workmanship or defective material.
All moving parts, such as batteries, cables, etc. are excluded.
The use of accessories other than those approved by ADE, especially batteries, will void the
warranty.
This warranty does not cover external normal wear and tear or damage caused by accident or
misuse. The warranty will not apply for devices that have been opened by unauthorised persons.
The statutory rights of the customer are not affected by this agreement in any way.
The dealer from whom the scale was purchased is responsible for complaints, customer service
and spare parts.
14
Cause
Measure
Unload the weighing surface and try
again.
If necessary, restart the scale.
Please contact your service partner.
Please contact your service partner.
Avoid draughts, air movement and
vibrations.
Please contact your service partner.
Unload the weighing surface and
then restart the scale if necessary.
Unload the scale.
Switch the scale off and on again.
LW300_LW300T-200520-Rev005-UM-en