ADE M15610 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wagi ADE M15610. ADE M15610 4 stron. Electronic baby hanging scale

Change unit

Should you prefer to weigh in another weighing mode than kg you might change into another mode

(lb, oz or indication of room temperature). In this case press SET key and choose preferred mode.

Make sure the scale has been started before by pressing ON and the displays shows `0.00´.

Warning signals and advices

If battery symbol (+-) is indicated on the display, the batteries are too weak to show a proper

indication. Replace the batteries.

In case scale will not be used for a long period of time take the batteries out to protect the scale and

secure a long lifetime.

If the scale is overloaded (max. capacity 30 kg!) the display shows `over´. Unload the scale.

In case the scale does not show `0.00´ after having been started, press TARE to find the zero point.

Safety

Your ADE baby hanging scale is a precision instrument. Handle with care. Do not drop or let

heavy object fall onto it.

When using the scale always respect the rules and advices of this Operating Manual.

Make sure the scale is not getting wet or stored in humid places.

Fluids penetrating the scale can severely damage the electronic part.

Never leave the baby hanging in the weighing trouser unattended

Cleaning

For cleaning just use a damp cloth or common disinfection products.

Do not use any aggressive cleaning fluids.

In case of faulty results

1. Make sure batteries are inserted correctly.

2. Make sure you are in the weighing mode you selected (kg or lb).

3. Do not load the scale before the display shows `0.00´.

Warranty – Liability

ADE will repair or replace this product within a period of 2 years from date of delivery applying to

defects occurred due to poor material or workmanship (presentation of invoice is necessary). All

moveable parts – batteries, cables, mains units, rechargeable batteries etc. – are excluded. Warranty

does not include natural wear, damages caused by incorrect or negligent handling, overuse or

unsuitable or improper storage. The cost of transport will be borne by the customer should the

equipment be located anywhere other then the customer's premises. In the event of transport

damage, claims under warranty can be accepted subject to using the complete original packaging and

the equipment secured the way it was packed and secured originally. All the packaging should

therefore be retained.

Any warranty claim will be rejected if the equipment is opened by persons not authorized expressively

by ADE to do so.

Customers abroad are kindly requested to contact their local dealer for any warranty claim, customer

service and spare parts.

050100-Rev000-M15610

Cleaning and maintenance