ADE M20813 Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wagi ADE M20813. ADE M20813 5 stron. Mechanical round dial personal scale including telescopic height rod

Drukuj stronę

Your ADE Mechanical Round Dial Personal Scale with Telescopic Height Measuring Rod is a quality

product. To achieve the best possible weighing and measuring results kindly read and respect this

Operating Manual.

Check carton contents:

Column and Round Dial

Scale platform

Telescopic Measuring Rod

Operating Manual

Assembling:

All parts and pieces have been pre-assembled by the factory to make sure mounting of the scale will

be quick and easy.

Fixing the Height Rod:

Remove the height rod from packing material and loosen the 2 screws on the lower side.

Guide the height rod through the green fixing device you find on the column and fix it firmly by

using the green fixing device on the platform with the 2 screws.

Make sure the screws are pulled tight.

Connect column and platform:

Loosen the 3 screws you find on the lower end of the column.

Fit column and platform together and screw them carefully together by using the 3 screws you

loosened before.

The tension bar is inside the column.

Put the scale in an horizontal position to hook the tension bar into the lever system you find

underneath the platform. This can be either done manually or – a bit easier – by using a

strong string.

The scale is now ready to be used. Take it to the working area and make sure the ground is even and

smooth.

Zero adjustment:

Before first use of the scale and to make sure that the scale indicates the correct weight it has to be

set to ZERO manually.

First step on and off the scale for several times to make sure that all parts come back into the

right position after transport.

For zero setting procedure the platform must remain empty.

In case the pointer did not return 100% to the zero point you may adjust the it by careful

twisting the adjusting screw you find underneath the head of the scale.

Double check your adjustment by stepping on and off the scale again.

After zero adjustment the scale is ready for use.

Installation and use of the scale

060100-Rev000-M20813