ADE M400020 Series Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wagi ADE M400020 Series. ADE M400020 Series 16 stron. Class iii approved scales electronic chair scales
Drukuj stronę
No. Name
1
Display
2
Battery charge level
3
Switching points 1 & 2
BMI status indicator
4
(HI, OK, LO)
5
Net status indicator
6
Status indicator
7
Hold – button
8
On/off, zero – button
9
Tare- button
10
Preset tare – button
11
BMI – Button
12
Units – Button
13
Number pad
Special function:
"0" key
"Enter" key
Standstill status indica-
14
tor (14)
:
15
"Hold"
16
"Ib"
17
"oz"
18
"kg"
"g"
Safety instructions
The ADE-display unit (MAK) corresponds to the latest state of the art technology and complies with standard
regulations and directives. Kindly follow the safety instructions in this operating manual, the country-specific
installation standards as well as the applicable safety conditions and accident prevention regulations in all
aspects. Portable and mobile HF-communication systems may influence electronic medical devices.
Electronic medical devices are restricted to special safety regulations in respect of their electromagnetic com-
patibility. For positioning and operation follow the instructions of this Operating Manual.
–
Before commissioning, ascertain whether the mains voltage and power type stated on the type plate
match the mains voltage and power type at the place of use.
–
Make sure that the mains cable does not pose any potential trip hazard.
–
Only use approved accessories and peripheral equipment.
–
Only operate the unit under permitted ambient conditions.
–
Remove the mains plug before cleaning the unit.
6
Description
LCD display for weight, mode, settings and configuration information.
Status indicator for the current battery charge level.
In program mode: Status indicator for switching points 1 & 2.
Status indicator of the automatic BMI (Body Mass Index) evaluation.
LCD on - net weight is being displayed.
LCD off – gross weight is being displayed.
LCD on - the weight is within ¼ of a calibrated value from the zero point.
LCD off - the weight is outside ¼ of a calibrated value from the zero point.
Activates the hold function.
Switch the scale on and off or re-sets the display.
Activate/ deactivate the tare function.
Press briefly to access the tare function.
Press for a long period to enter and save the tare value.
Enter to proceed with BMI mode and to enter as next step the height.
Press again to return to weight mode.
Switch button between primary and secondary units. Not available for CE
approved class III scales
Figures 0-9, Clear, Enter. - Navigation functions:
The blue symbols under the keys (up, down, left, and right) describe the
key functions in configuration and setting modes. These keys are used
to navigate through the menus, to select numerical values and to in-
crease or lower the values.
In weight mode, you can change between gross and net weight using
figure "0" (if any weight have been tared off).
Function in weight mode: "Print" if printer has been connected.
The scale is at a standstill, meaning the weight is stable and no
movement is on the platform. This is a mandatory precondition for func-
tions such as resetting, printing and taring).
If the LCD is not displayed: The scale is not in a the standstill mode
If displayed is the hold function is activated
If displayed is the weight is displayed in pounds
If displayed is the weight is displayed in ounces
If displayed is the weight is displayed in kilograms
If displayed is the weight is displayed in grams
Safety
Key 6 menu direction to the RIGHT
Key 4 menu direction to the LEFT
Key 8 menu direction DOWN
Key 2 menu direction UP
M400020-210322-Rev007-UM-e