Austlift 915100 Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt bezpieczeństwa Austlift 915100. Austlift 915100 16 stron. Roofer's kit basic

STEP 2 -

Find a suitable anchor to attach the top of the rope of the roofer's kit to, as per

AS/NZS 5532 standard it should be able to take a load of 15kN.

Anchor Point Using Endless Sling

1. Locate a suitable object such as a sturdy tree, the wheel or axle of a car or

truck, or a large, concreted fence post.

2. Loop the sling around the object and back through itself, with protection of

the sling at sharp edges. Wrap twice. Angle where sling takes load must be

less than 120 degress.

Note: Do not use the tow bar of a vehicle to attach to as it may not be sufficiently

rated.

Anchor Point Using Temporary Roof Anchor

1. Set the ladder along the midpoint of the roof of the work area.

2. Remove a row of four roof fixings and position the anchor on roof so holes are

aligned. (The anchor point must be opposite or above the working area.)

3. Fix anchor to roof with supplied screws through existing holes.

WARNING: While setting up the anchor point, you are not protected from

falls. Ensure your ladder is secure before climbing it using either a second

person to hold it secure or a ladder clamping system.

AUSTLIFT ROOFER'S KIT

= ANCHOR POINT

PERSONAL PROTECTION EQUIPMENT

Work Area