Australian massage group AMG-3800 Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Masaż Australian massage group AMG-3800. Australian massage group AMG-3800 10 stron. Four-wheel driven, muted, intelligent massage hands
Drukuj stronęMethod of Usage
Connect the joint of the air pipe and power cord (Note: There are marks on the air pipe and
•
the cable connectors are different sizes). (Figure 9)
Pull the calf rest air pipe and power cord through the hole of the front dam-board, then
•
tighten the screws of the dam-board. (Figure 10)
•
Zip up the backrest kneading cloth. (Figure 11)
•
Plug the heat plug of the back cushion into the heat hole on the backrest, and put the back
cushion tidily on the backrest. (Figure 12)
•
The calf rest decoration cover is a card slot design, make an effort to push it during assembly
(Note: Keep the cover tight with the side), armrest installation is completed. (Figure 13)
Method of Usage
6. Calf installation
Install the rotating shaft in-calf with the fixed axis first. Note: The hole should be aligned with
•
an R shape pin assembly. (Chart 1)
After calf is connected and aligned with the fixed axis, insert it. (Chart 2)
•
Plug in the R pin, then move to the other side of the calf, and plug in the next R pin. (Chart 3)
•
•
Finished. (Chart 4)
NOTE:
•
While the machine is reclining, do not apply your body weight to the calf rest. (Chart 1)
When going to sit down, ensure that the massage hands are not in the seat area to avoid
•
discomfort. (Chart 2)