5BARz MD015A-800 Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przedłużacz 5BARz MD015A-800. 5BARz MD015A-800 7 stron.

Troubleshooting

Go to www.cellynx.com/support/register. Once you've registered you'll have access to

detailed troubleshooting information and contact details.

The 5BARz Road Warrior has an external antenna option available. Use of an external

antenna can improve performance and allows more flexibility for locating the 5BARz unit

within the vehicle.

For additional information related to the external antenna use and

for ordering please go to Cellynx.com. (Also, please see "Antenna Requirements" section

below.)

FCC ID: XGLMD015

IC: 8272A-MD015

The 5BARz™ Road Warrior cellular signal booster has been tested and found to comply with the

limits specified in Parts 15, 22 and 24 of the FCC Rules, as well as Industry Canada Radio Service

Standards, RSS-131. However, there is no guarantee that interference will not occur in a

particular installation. Operation is subject to the following conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including interference that

may cause undesired operation.

Only accessories authorized by Cellynx Group, Inc. are approved for use with the 5BARz™ Road

Warrior cellular signal booster. Modifications to the original equipment, or use of accessories that

are not authorized by CelLynx, Inc. for use with the 5BARz™ Road Warrior, could void the user's

authority to operate the equipment.

Technical Information as required by Canada RSS-131

The nominal input and output impedance of the 5BARz™ Road Warrior is 50 Ohms.