Great Lakes GL480E-2432 Instrukcja instalacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Obudowa Great Lakes GL480E-2432. Great Lakes GL480E-2432 13 stron. Equipment cabinet/rack

CASTER AND LEVELER MOUNTING

CAUTION

• To install casters or levelers the cabinet must be tipped onto its

side. The cabinet can be very heavy, several people will be

required in this process. Please practice safe lifting techniques.

• DO NOT lay the cabinet on its front or back, this may damage the

door hinges.

• Removing doors and sides will help reduce the weight of the

cabinet.

• Before tipping, remove the side panels to prevent damage to the

locks and latches.

CASTER MOUNTING

On the bottom of the cabinet there are eight threaded holes, two in

each corner. The holes are threaded 1/2"-13 thds. and will accept the

levelers provided. Once the levelers are installed,the cabinet level can

be adjusted with the use of a 3/4" open-end wrench. If ordered with

casters, two will have brakes that can be actuated by turning the brake

lever on the side of the wheel. The four inside holes in each corner are

meant to accept the casters. Be sure to thread the caster all the way

into the bottom of the cabinet until it is firmly seated.

BOTTOM VIEW

OF Cabinet

Through Holes (4)

11/16 Dia.

(4) Adjustable

Levelers

Counter clockwise rotation will

adjust the leveling glide up

Note: If you want to use casters AND leveling glides you will need 4" levelers.

ANCHOR MOUNTING THRU HOLE

The middle .687 dia. thru holes are for securing the cabinet to the

floor. These holes will accept a standard concrete anchor if desired; the

Seismic Anchor Kit (AK101) is suggested.

Threaded Holes

1/2" - 13 Thds.

Swivel

Casters (2)

Swivel Caster

w/ lock (2)

Clockwise rotation will adjust

the leveling glide down