GREAT PLAINS BD7600 Skrócona instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Siewniki GREAT PLAINS BD7600. GREAT PLAINS BD7600 20 stron. Box drill
Również dla GREAT PLAINS BD7600: Instrukcja regulacji w terenie (12 strony)
Drukuj stronę
Renaming
Tap the Renaming field. Type in an unique name using
the pop-up keyboard.
Product Type
Tap the Product Type field. Select "Seed" for a seed-
based material from the drop-down menu. Select
"Solid" for a dry fertilizer material from the drop-down
menu.
Target Rate
Tap the Target Rate field. Enter the desired rate of
material application during field operation using the
pop-up menu.
Target Rate Increment
Tap the Target Rate Increment field to enter the
desired incremental increases and decreases for
adjustments to target rate during field operations. 10%
is the factory preset value.
Calibration Factor
Tap the Calibration Factor field to enter the calibration
factor from the BD7600 Material Rate manual for your
drill.
Split-Box Hoppers Only: Metering System 1 or 2
selection is required. Tap metering system soft key to
toggle between metering system 1 and metering
system 2.
Great Plains | 195-835QS | 03/25/2022
BD7600 Quick Start Guide
Selection is indicated by the meter icon next to the
Calibration Factor. Metering System 1 selection shown
below.
Product Configuration Menu Overview
This section will assist with navigation within the
Product Database menus.
Menu Glossary
Identifies the product profile number.
Tap to add a product to the database.
Tap to delete a product profile. Not an
option for product profiles 1 and 2.
Tap to shuffle through existing product
profiles.
Tap to toggle between metering system 1
or metering system 2. (Split-Box Hoppers
only.)
8