ActivePure F170A Podręcznik - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt medyczny ActivePure F170A. ActivePure F170A 16 stron.

DEVICE DESCRIPTION

The ActivePure® Medical Guardian, model Number F170A is a free-standing portable device, manufactured in the USA, constructed of aluminum

and steel, dimensionally measures 11.5" W x 26.5" H x 21.0" D and weighs 48 lbs. The device operates using a standard 120 VAC, 60Hz power source.

Power consumption ranges from 1 watt in standby mode to 117 watts on high speed. The device includes: a HEPA filter; multipoint ionizer; a

photocatalyst module consisting of two 10-watt UVGI bulbs operating at a wavelength of 254nm; two pieces of polycarbonate honeycomb material

with a combined surface area of 708 square inches, coated with a TiO2 based catalyst called ActivePure®; power switch; circuit board which controls

the device operations and an internal fan to draw air through the device, as shown in the general device design (Figure 1).

Figure 1

Lab test results demonstrated the ActivePure® Medical Guardian, model F170A device using ActivePure® to expose Staphylococcus epidermis and MS2

bacteriophage to hydroxyl radicals and super ions formed as the result of UV exposure on the photo catalyst, has the ability to destroy the tested bio

organisms on the filter as shown in Table 1 below.

Table 1

Organism Type

Bacteria, gram +

Virus, RNA

The bio organisms selected, Staphylococcus epidermidis, a bacteria and MS2 bacteriophage, a virus would provide a strong challenge against the

ActivePure® hydroxyl radicals and super ions exposure.

"ActivePure®"

Organism Name

Test Temp / RH

Staphylococcus epidermidis

73.2°F / 50%

MS2 bacteriophage

73.2°F / 50%

Exposure Time (H)

Avg Log – Reduction

5.77

4.15