Autonics BF4R-E Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria Autonics BF4R-E. Autonics BF4R-E 8 stron. Fiber optic amplifier
Również dla Autonics BF4R-E: Podręcznik (11 strony), Podręcznik (7 strony), Podręcznik (8 strony)

Drukuj stronę

BF4 Series

Dimensions

16.4

Installations

Mounting amplifier unit

● When mounting the amplifier

① Hook the front part of the amplifier on

DIN rail(or bracket).

② Press the rear part of the amplifier on

DIN rail(or bracket).

● When releasing the amplifier

Push the back of amplifier toward ③ and

lift the hole for fiber toward ④ up then

simply take it out without tools.

Connection of fiber optic cable & amplifier

Parts description

● BF4R / BF4G / BF4RP / BF4GP / BF4R-R / BF4G-R

B-32

● Connect the bracket

36.5

Cable:Ø4, 2m

Control output indicator(red)

Stability indicator(green)

Mode selection switch

Timer selection switch

NON:Not useing timer function

OFD:OFF Delay timer

Sensitivity setting button

26.9

65.3

● In case of using L bracket

● In case of using screw

※ Notice: If setting bolt is tightened with over

① Open the lock lever to "

② Insert the fiber optic cable in the amplifier slowly.

(Depth: approx. 10mm)

③ Close the lock lever to "

● BF4R-E / BF4G-E

● Bracket

Ø4

35mm DIN rail

useable

Installation of fiber optic cable

L bracket

Fixing nut

Tightening torque:

Max. 2kgf . cm

specified tightening torque, hood of

fiber optic cable may be damaged.

" direction.

Control output indicator(red)

Stability indicator(green)

Mode selection switch

External synchronization

selection switch

TRIG:Trigger synchronization

GATE:Gate synchronization

Sensitivity setting button

(unit: mm)

R1.6