Autonics BS5-P Series Podręcznik - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik dla Akcesoria Autonics BS5-P Series. Autonics BS5-P Series 4 stron. Push button type photomicro sensors
Również dla Autonics BS5-P Series: Skrócona instrukcja obsługi (3 strony)
Drukuj stronę
Functions
Emitter OFF function
The emitter LED can be turned ON/OFF without pushing the button, to test for stable operation of the receiver.
NPN open collector output
Sensor
(brown)+V
(black)Output
(white)Control
(blue)0V
Check stable operation function
Reduces the LED intensity by approximately 20% while button is not pushed, and check that the receiver is still receiving light
(same transistor ON status as at 100%) This ensures that sensor will not malfunction due to changing light intensity.
NPN open collector output
Sensor
(brown)+V
(black)Output
(white)Control
(blue)0V
Simultaneous use of emitter OFF and check stable operation function
Follow the circuit diagram below:
NPN open collector output
Sensor
(brown)+V
(black)Output
(white)Control
(blue)0V
※ When using the emitter OFF function and check stable operation function simultaneously, the transistor used should be able to open
and close 50mA/10V and resistance should be over 1/8W. Failure may cause product damage.
※ When emitter OFF function and stable operation check function is not used, insulate the control (white) wire.
Otherwise, it may result in product damage.
Push Button Type Photomicro Sensors
External
connection
Emitter
OFF
function
External
connection
390Ω
Check
stable
operaion
External
connection
Emitter
OFF
Check
390Ω
function
stable
operaion
PNP open collector output
Sensor
(brown)+V
(black)Output
(white)Control
(blue)0V
PNP open collector output
Sensor
(brown)+V
(black)Output
(white)Control
(blue)0V
PNP open collector output
Sensor
(brown)+V
390Ω
(black)Output
(white)Control
(blue)0V
SENSORS
CONTROLLERS
External
connection
MOTION DEVICES
Emitter
OFF
SOFTWARE
function
(A)
Photoelectric
Sensors
(B)
Fiber Optic
Sensors
External
(C)
connection
LiDAR
Check
(D)
Door/Area
stable
Sensors
operaion
(E)
390Ω
Vision
Sensors
(F)
Proximity
Sensors
(G)
Pressure
Sensors
(H)
Rotary
Encoders
External
(I)
connection
Connectors/
Connector Cables/
Sensor Distribution
Boxes/ Sockets
Check
stable
Emitter
operaion
OFF
function
A-139