Agriweld Swath Roller Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do ciągników Agriweld Swath Roller. Agriweld Swath Roller 17 stron.

The swath roller is fitted with amber side marker lights as standard, however, it is not supplied

with the relevant 12-24V electrical plug which can vary, to suit the connection to your

tractor.

Please check that your LEDs are working correctly before use in the dark and especially

when in use on public roads. Please note that you are responsible for ensuring the LEDs are in

full working order before each use and this should form part of your routine maintenance

checks.

STANDARD FIXED AMBER LED SIDE MARKER LIGHTS

To connect your amber LED side marker lights, fitted as standard, you will need to

wire them up to a relevant 12-24 V electrical plug, suitable for your tractors electrical

OPTIONAL AMBER LED3DV FLASHING MARKER LIGHTS:

If ordered as an extra option, the amber flashing LED side marker lights are set to pattern PA1

before delivery. If you wish to change this, you will need to work your way down the list of

patterns following the instructions below before fitting the plug and connecting to the

tractor.

1. Using the

GREY

the flashing pattern.

2. Connect the

BROWN

3. Connect the BLACK wire to Earth (-NEGATIVE) on the battery.

4. Touch the

GREY

in the sequence.

5. Keep touching the

6. When happy you can fit your 12-24V plug using only the

and BLACK Earth (-NEGATIVE) wire.

7. Cut excess

GREY

contact.

CONNECTING YOUR LEDS

supply.

BLUE

WIRE = EARTH (NEGATIVE -)

BROWN

WIRE = LIVE (POSITIVE +)

wire to make the change you will need a 12V battery on hand to alter

wire to Live (+POSITIVE) on the battery.

wire once to Earth (-NEGATIVE) which will produce the next pattern

GREY

wire in this way until the desired pattern is achieved.

and

YELLOW

wires down to within the sheath to prevent further

BROWN

LIVE (+POSITIVE) wire