Activox XYC100B-PRO Skrócona instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt medyczny Activox XYC100B-PRO. Activox XYC100B-PRO 8 stron.

3. Place the nasal cannula in your nose and breathe normally. The unit

detects when you begin to take a breath and delivers oxygen in PULSE-

WAVE™ doses. Because this type of delivery is very gentle, you may

not feel the pulse of oxygen. To verify that oxygen is being delivered,

reference the LED above your selected Pulse Setting. This LED will flash

every time a breath is detected and a bolus of oxygen is delivered.

4. To recharge the unit and/or External Battery*, you can use the AC

or DC Adapter/Charger. Connect the adapter to the connector

port on the unit and the charger to a source of electricity.

5. To turn the unit off, press and hold the Power Button for 2

seconds until the green Power LED light and the unit shut off. The

internal fans may continue to operate for an additional period

of time until the temperature inside the unit is sufficiently cooled.

Battery Life Timetable

Battery

Typee

Internal Battery**

External Battery**

* If an External Battery was purchased, please refer to the Operator's Manual for detailed

charging and operating instructions.

** Based on Breaths Per Minute.

1 LPMeq

5.5 Hours

Sport Model

Pro Model

12.5 Hours

All Models

3 Hours

Pulse Setting

2 LPMeq

4 Hours

3.25 Hours

7.25 Hours

6.25 Hours

3 Hours

3 LPMeq

2 Hours