iHealth ABP100 Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Monitor ciśnienia krwi iHealth ABP100. iHealth ABP100 16 stron. Ambulatory blood pressure monitor

Drukuj stronę

Remember to:

1. Make sure that the appropriate cuff size is used; refer to the cuff circumference range in the Specifications section

of this manual.

2. Measure on the same arm each time.

3. Stay still during measurement. Do not move your arm, body or the monitor.

4. Stay still and calm for one to one and half minutes before taking a blood pressure measurement. Prolonged

over-inflation of the bladder may cause ecchymoma of your arm.

5. Keep the cuff clean. Cleaning the cuff after every 200 times of usage is recommended. If the cuff becomes dirty,

clean it with a moistened cloth. Do not rinse the monitor or cuff with running water.

Left arm measurement

TAKING YOUR BLOOD PRESSURE READING

The iHealth CardioMed Ambulatory Blood Pressure Monitor has two measurement modes. Preparing your patient for

the ABPM study is the most important step to achieving a successful test.

TAKING YOUR BLOOD PRESSURE READING MANUALLY

Long press the

are shown for self-test. You can check the LED screen display according to the right

picture. Please contact the service center if symbol is missing.

b. Then the cuff will be slowly inflated. The blood pressure and pulse will be measured

during inflation. Inflation will stop as soon as the blood pressure and pulse rate have been

calculated and displayed on the screen. The result will be automatically stored in the

memory, and all results will be uploaded to the App automatically upon the next successful

Bluetooth connection.

During measurement, you can press the

the monitor manually.

After measurement, the monitor will display SYS and DIA in first screen, and

then display pulse rate in 2 seconds or press any button, and turn off display in 2

seconds or press any button.

Note: Manual test readings taken before automatic mode is configured cannot be stored in memory.

button, the monitor will activate and all display characters

button or

9 / 16

Right arm measurement

button to turn off