Autonomic MMS 2 Instrukcja konfiguracji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Serwer Autonomic MMS 2. Autonomic MMS 2 17 stron. Mirage media server
Drukuj stronę
Connections
Your server has several ports on the back for connecting your audio, networking, and control
system gear. (Refer to the diagram on the Quick Start Guide included with your server for
connection recommendations.)
•
HDMI and DVI video ports for connecting to a television or other display
•
Four (MMS·5A) or one (MMS·2) analog stereo audio outputs
•
One coaxial (MMS·5A) or Toslink (MMS·2) digital audio connection
•
One jitter-free audiophile USB audio output (MMS·5A only)
•
One Ethernet 10/100/1000 Base-T Gigabit Ethernet Local Area Network (LAN) port for
broadband media services and control system interface
•
Multiple USB and eSATA ports for storage expansion (available in a future firmware release)
The MMS front panel has a power button and a power LED. The MMS·5A also has a blue accent
light that can be turned off if desired using a toggle switch on the back panel.
NOTE
It's important to make all necessary connections to the Mirage Media Server before turning it
on for the first time.
Certain aspects of the configuration are automatically set the first time you power on the
device based on the connections that are present. While these can always be changed later, your
installation will go smoother if you make all the connections first.
Accessories Included With The MMS
•
AC power cable and power supply
•
High quality analog audio cables
•
Digital coaxial interconnect (MMS·5A) or fiber optic Toslink digital audio cable (MMS·2)
•
Four removable feet (for shelf-mount installations)
•
Removable rack mount ears (MMS·5A)
•
IR remote control for the on-screen display and media browsing (MMS·5A)
What You'll Need To Get Started
•
A network router or switch connected to the Internet with an available Ethernet port.
•
A standard (straight-through) Category 5 or Category 6 Ethernet cable.
•
A computer (Windows or Mac) connected to the same network as the MMS.
Network Connection
Using a standard (straight through) Category 5 or Category 6 Ethernet cable, connect the
Ethernet port on the MMS to an available port on your network router or switch.
4 of 16
Mirage Media Server Set Up