Autool X60 Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przyrządy pomiarowe Autool X60. Autool X60 7 stron. Car obd multi-function meter
Również dla Autool X60: Podręcznik użytkownika (11 strony)
Drukuj stronę
Holder Installation
Tear 3M double-sided tape, and fasten it with holder
base.
Pull up the bottom center to right and left.
Insert the base of holder to the bottom of host.
Insert the bolt from right, and nut from left.
Fasten the screw with screwdriver.
Product Operating Setting
Turn right/left of button in the top of host, the displayed large
character can be switched fast.
If the device does not support current data display, red X will
be displayed. If function data needed cannot be selected,
please check in the data stream of Electronic Control
Diagnosis System.
Current speed
Water temperature
Outside temperature
Average speed
Intake temperate
Battery voltage
5
Product Parameter Setting Including
Engine displacement - To accurately calculate instant
and average fuel consumption.
Fuel type - Choose petrol or other type fuel, fuel
consumption data will be much different.
Over-speed alarm - When it reaches to the scheduled
speed, it will tick to alarm, and the character for speed
will display in red.
Water temperature warning - When it reaches to the
scheduled engine temperature, it will tick to alarm, and
the character for temperature will display in red.
Shift reminding - When it reaches to the scheduled
speed, it will remind to shift, and display shift symbol.
Shift reminding limit - When it reaches to the scheduled
speed, it will turn off shift reminding, in case it exceeds
the scheduled speed, and cannot shift up.
Standby time - After the vehicle shuts down, and it
reaches to the scheduled standby time, X60 will change
to automatic sleep.
Speed error adjustment - when the speed is 100km,
adjust displayed speed of X60 to 100km.
Battery voltage adjustment - Adjust X60 voltage to
8