Autopage RF-505 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Alarm samochodowy Autopage RF-505. Autopage RF-505 12 stron. Part 1
Również dla Autopage RF-505: Programowanie nadajnika (1 strony)

Drukuj stronę

CHANNEL AUXILIARY FUNCTION (OPTIONAL)—

You may use the CAR button on your remote transmitter for a separate

function. For example, if your vehicle is equipped with a factory electronic

trunk release. The security system can be interfaced with the factory switch

and electronically open your trunk by pressing the CAR button for 2 seconds

on the remote transmitter.

CHANNEL AUXILIARY FUNCTION (OPTIONAL)—

You may use the AUX button on the remote transmitter for a separate

function. For example, if your vehicle is equipped with power windows or a

sunroof. The security system can be interfaced with an optional window

control module (Autopage AC68). To operate the 3

the AUX button on the remote transmitter.

CHANNEL AUXILIARY FUNCTION (OPTIONAL)—

You may use the 4

separate function. For example, if your wish to add a remote start to your

vehicle controlled by the security system. The security system can be

interfaced with an optional remote start module (Autopage RST2050KE). To

operate the 4

channel function, press the AUX & CAR buttons together on

the remote transmitter.

SENSOR BY-PASS—

The RF-505 can by-pass the SIS-5P shock sensor and the 2

from the transmitter. When arming the alarm with the "Lock/Unlock"

button, within 3 seconds press the "Lock/Unlock" button again. The siren

will give a long chirp confirming the shock sensors are turned off. The

sensors will reset the next time the alarm is armed.

PRIOITY DOOR UNLOCK (OPTIONAL)—

Your RF-505 security system is equipped with a priority door unlock feature

which will independently unlock the drivers door first when disarming the

security system. Pressing the LOCK/UNLOCK button a second time within

3 seconds of disarming will unlock the rest of the vehicle.

This feature requires additional installation and is not a standard feature of

the security system.

channel button on the remote transmitter to operate a

channel function, press

sensor port