Autoseeker Electronics A680-1 Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla GPS Autoseeker Electronics A680-1. Autoseeker Electronics A680-1 5 stron. Watch tracker

Drukuj stronę
1.
Message: To check message received.
Press the key
no message, the screen will be blank; if with message, it will enter the message list interface. It can be
stored with 19 messages. If a new message comes in, the first message will be deleted automatically.
Weather: To view the current location weather information. Press the key
2.
will be displayed. Shortcuts: Main interface buttons
3.
My position: To view the current geographic location information. Press the key
message will be displayed. Shortcuts: Main interface buttons
4.
Language: Set the display language.
5.
Time setting: Set the time zone, daylight saving time.
6.
Alarm: Set alarm.
7.
GPS Status: Check current location's GPS satellite signal searching strength.
Press the key
satellite searching mode interface, if GPS is in normal, and also in the GPS signal covered area, LCD
screen will display the status diagram of the satellite and satellite signal strength.
Interface indication
The white characters stand for the number of satellites. Green ones stand for the density of the signals.
When lower than 30, it means the signals are too weak, please move to some other Spacious place.
Usually the satellites density will not over 50. It's shown as below:
8.
GPS Info: When power on, press the key
GPS function (positioning status, latitude, longitude, altitude, speed, direction). The tracker will turn to
the GPS function. It will correct and update the time. Shortcuts: Main interface buttons
9.
Others: The IMEI numbers, software version and battery status of the tracker.
V
Mobile control and command setting
Notes: The following setup instruction can be applies to all mobile phone only before the guardian number
Such as the need to increase their privacy, please change the initial password and
not be set.
set guardians number.
once to enter the function menu interface, press
to enter the function menu interface, press
to select the message.If there's
.
.
to select GPS status, enter the GPS
to enter the function menu interface, then choose the
and the message
and the
.