HighSecLabs SM20N-4 Instrukcja szybkiej instalacji

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Przełącznik HighSecLabs SM20N-4. HighSecLabs SM20N-4 2 stron. Secure km switches
Również dla HighSecLabs SM20N-4: Podręcznik użytkownika (15 strony)

Drukuj stronę

Quick Installation Guide

2/4/8 Ports High Security KM Switches

Objectives

•

This guide includes instructions for installing HSL SM20N-4,

SM40N-4, SM80N-4 KM devices.

•

A KM allows sharing keyboard, mouse, audio and USB

peripherals between multiple computers.

•

For further assistance please refer to HSL website:

http://www.highseclabs.com.

SM40N-4 Model is shown

 Connect peripherals to the KM

Console ports

•

Keyboard: Connect a USB keyboard

to the corresponding KM console

keyboard port.

Mouse: Connect a USB mouse to the

•

corresponding KM console mouse port.

Note: authentication devices such as

smartcard and biometric readers are enabled

by default, other devices must be explicitly

whitelisted – for further information please

refer to the KM Administrator's guide.

 Connect computers to the KM

Computer ports

Computer keyboard & mouse

•

connection: Connect each computer

to the KM keyboard & mouse computer

port using a USB A to USB B cable.

Connect the USB A end to the computer

and the USB B end to KM.

•

Computer video connection:

Directly connect a monitor to each

computer. Multi-monitor computers

require driver installation (currently

available only for Windows -

highseclabs.com/downloads/km-multi-

display-drivers/).

 Power ON your system

•

Power ON the system:

Connect all peripherals and computers

to the KM prior to powering it up. Power

ON the KM by plugging it to the DC outlet.

By default, after product power-up,

the active channel will be computer #1,

indicated by the applicable front panel

push button LED lit.

All other marks are the property of their respective owners. Images for demonstration purposes only.

Note: Power ON self-test: As the product

powers-up it performs a self-test procedure.

In case of self- test failure for any reason,

including jammed buttons, the product will be

Inoperable. Self-test failure will be indicated

by abnormal LED behavior – for further

https://

information please refer to the KM setup guide.

 Switching between computers

•

Switch between computers by pressing

the corresponding front panel button

on the KM. The front panel button of

the selected computer will illuminate.

SM20N-4 • SM40N-4 • SM80N-4 | QUICK INSTALLATION GUIDE

General

•

Verify that all peripherals and computers are turned off prior to

connecting them to the product.

•

The KM's back panel is divided into Console Ports and Computer

Ports sections.

– Connect peripherals which are due to be shared by the KM to

the Console ports.

– Connect computers that require access to the shared

peripherals to the Computer ports.

HLT31892 Rev. 1.0