AFL FLX380-304 Skrócona instrukcja obsługi - Strona 17

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt testowy AFL FLX380-304. AFL FLX380-304 18 stron.

FTTx PON Power Meter

FLX380-303 and -304 support AFL's ServiceSafe

out-of-service OTDR testing and live PON power measurements to be made from a single port. In the FTTx PON

Power Meter mode, the first screen displays received FTTx PON power at 1490 and 1550 nm. An OTDR test can

be initiated from the PON Power

Meter mode. On dark fibers, users

can test at 1310/1550 nm. On live

fibers, users can test at only 1625

or 1650 nm.

Transferring Files to a PC using USB

To transfer files from your FLX380 to a PC using a USB cable, perform the following:

1 Connect your FLX380 to a PC using the supplied type A to Mini USB cable. Make sure the mini-plug is fully

seated in your FLX380.

2 Press the [USB] soft key on the FLX380's Main Menu.

3 From your PC desktop, open My Computer. A new removable drive named [OFL X:] will appear, where 'X:' is

the drive letter assigned to your FLX380 by the PC.

4 Under [OFL X:] you should see two folders: [RESULTS] and [SOFTWARE]. Copy the [RESULTS] folder to your PC.

5 Under [RESULTS] you will see: [TRACES]. Under [TRACES] you will see all of the folders containing OTDR traces

or OPM results.

Note: Before removing the USB cable connecting your FLX380 to your PC, or pressing the [Cancel] soft key on

the USB page, left click the Safely Remove Hardware icon in the Start bar of your PC, then left click the Safely

Remove USB mass storage device – Drive (X:) message, where 'X' is the drive letter assigned to your FLX380.

For detailed operating instructions, refer to the FLX380 User's Guide (available on supplied CD and

www.AFLglobal.com).

(FLX380-303 and FLX380-304 models only!)

capability (US patent 8,411,259), enabling both in-service and

™