Adesso NuScan 7300CR Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Czytnik kodów kreskowych Adesso NuScan 7300CR. Adesso NuScan 7300CR 14 stron.

Drukuj stronę

Performance parameter

Transmission distance

bluetooth:10m/2.4G:30m(open distance)

Transmission frequency 2.4GHZ

64K(about 3500 14b 1D barcodes)the memory

Storge

capacity can be customizd

Sensor

Linear CCD sensor

Light source

632nm red diode(LED)

Processor

32-bit ARM Cortex-M3 MCU

Codabar,Code 11,Code 93,MSI,Code128,UPC-A,

UCC/EAN-128,Code 39,EAN-8,EAN-13,2/5 Matrix,

Barcode support

Industrial 25,Standard 25etc.

Resolution

4mil(0.1mm),PCS45%

Depth of field

500mm@20mil/0.5mm,PCS90%

Decoding speed

500scans/sec

Trigger mode

Manual automatic scanning ,continuous scanning

Scanning width

5cm―30cm

Prompt mode

Buzzer ,indicator light(LED)

Print contrast

30%

Scanning angle

Roll 35°、pitch65°、yaw65°

Using instruction

Poweron

Pressthebutton,thescannerwillhavetwoshortbeepsoundsandtheindicaterlightwillblinktwotimes

,thescannerispoweron.

Poweroff

The default auto shutdown time is 20 seconds ,if there's no operation for 20 seconds ,the Buzzer will

havealongbeepsoundandthenenterintosleepmode.

Enterintoparingmode

1. press the button for 10 seconds 2.scan the 'scan and pair 'barcode

（Scanandpair）

Remark：

1. for bluetooth scanner ,please press the button for 10 seconds or scan the setup bar code

below then the scanner will enter into pairing mode.

2. For 2.4 G wiredless scanner ,please plug the adapter to the computer and scan the setup

bar Code below within 10 seconds ,otherwise ,the scanner won't pair to the computer ,if fail to

pair Please pull out the adapter and plug in again ,then repeat the same step.

Bluetooth adapter installation Guide (winxp)

1.plug in the bluetooth adapter,bluetooth device icon will show on the system tray;

2.double click the bluetooth icon then the bluetooth device dialog box will show( user can also

click the bluetooth device from the control panel；

3.click add and the bluetooth device wizard will show;

4.scan the setup code 'scan and match 'or press the trigger button for 10 seconds in order to let

The bluetooth scanner get into matching condition

The LED light flashes quickly ,Select 'my device is set up and ready to be found 'and click next

5.there will be a bluetooth device wizard dialog box that shows 'barcode scanner 'icon ,if not

Click 'search again'

6.double click 'barcode scanner 'icon and see the passkey dialog box;

7.select dont use a passkey and click next to start installing the driver

8.after installation ,there will be an extra barcoe scanner in the bluetooth device and an extra

HID Keyboard device in the device manager ,the bluetooth adapter install tion in finished now

9.now open any edit box like notepad to start reading and uploading barcodes

Bluetooth adapter installation guide(win7)

1.plug in the bluetooth adapter then the bluetooth icon will show;

2.double click the bluetooth icon and then the devices and printers will show ;

3.activate the scanner and scan the setup code scan and match or press the

trigger button for 10 seconds then LED light flashes quickly and the bluetooth

scanner enters to the matching concondition;

4.click add a device and there comes a dialog box that shows barcode scanner;

5.right click the device icon and right click again to select the properties;

6.select drivers for keyboard ,mice ,etc[ HID] in the properties dialog box and

click yes;

7.after installation there will be a balloon to show installation success ,the

device manager;Has a new HID keyboard device

8.Now the bluetooth installation finished,Open any edit box like notepad to start

reading And uploading barcodes.

Bluetooth adapter installation guide(win8)[need above 2.0 adapter]

1.plug in the bluetooth adapter;

2.activate the scanner ,press the trigger button for 10 seconds then LED light

flashes quickly and The bluetooth scanner enters to the matching condition ;

3.open control panel ;

4.Click 'add a device'and there comes a dialog box that shows 'barcode scanner

'select the device And click 'next';

5.Now the bluetooth installation finished ,open any edit box like notepad to start

reading and Uploading barcodes.