Gamebox 64HD Instrukcja instalacji/montażu - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji/montażu dla Karta graficzna Gamebox 64HD. Gamebox 64HD 11 stron. For all standard n64 models

RCP Flex Cable Additional Connections

STEP 2

Solder the flex contact to the N64 motherboard

location marked "5v" in silkscreen (shown above).

FAILURE TO MAKE THIS CONNECTION

PROPERLY WILL RESULT IN THE 64HD PCB FAILING

TO BOOT WHEN THE CONSOLE POWERS ON.

For N64 motherboard revisions 01-05 (shown

left). Use a small amount of 30 gauge wire to connect

the CTRL breakout pad on the RCP flex cable to PIN 16

on the PIF. The Reset pad isn't populated.

For motherboard revisions 06-09 please see the next page.

The motherboard revision can be found near

the cartridge slot (shown below).

Page 5