AgXcel Muller ISO Konfiguracja szybkiego startu - Strona 6
Przeglądaj online lub pobierz pdf Konfiguracja szybkiego startu dla Sprzęt rolniczy AgXcel Muller ISO. AgXcel Muller ISO 17 stron.
Drukuj stronęSECTIONS CONFIGURATION
`
A section refers to a part of the implement in which all the nozzles are supplied with liquid from a section valve. Closing the
section valve switches off the section. The implement has as many sections as it has section valves which can be switched off. The
first section is always on the left in the direction of travel. The second is on its right.
Entering the Number of Sections
•
From the Run Screen, press
the Configuration icon
•
Then press the Sections
Configuration icon
The Sections screen will appear (shown on right). If
•
the section number is unchecked, the system will
disable the specific section, and it can't turn on from
the Run Screen. This feature allows the operator to
disable the sections that aren't going to be used.
•
Enter the number of sections in the Total Sections
field.
•
Enter the number of rows in each section.
•
Fence Rows: None
Press the back icon
•
*Note: The ECU will indicate that it needs to be
restarted. You can restart the system now that you are
at the conclusion of the set-up process.
Icons for Sections on Run Screen:
Open or close the section valves
from left to right or from right to
left.
WWW.AGXCEL.COM
Quick Start Setup Instructions for Müller RCM ISO -
(Configuration Icon)
(Section Configuration Icon)
Single Product
*Note: Please note with using AgXcel's
integration Harness PN 56410 the following
configurations are possible:
1 Product Configuration: Have up to 8 Sections
2 Product Configuration: Have up to 6 Sections
877-218-1981
Open or close the section valves if
you have 4 sections or less
Page | 6