CORNING LSE 6705 Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt laboratoryjny CORNING LSE 6705. CORNING LSE 6705 12 stron. Platform rockers
Również dla CORNING LSE 6705: Instrukcja obsługi (8 strony)
Drukuj stronę
3.0 Installation of the Platform Rocker
3.1 Unpacking
Before starting the installation, carefully examine the rocker for possible
damage or missing parts .
Open the box and carefully remove the padding . Check that the rocker
Z Z
has not been visibly damaged during transportation . Keep the packing
material until you ensure that the rocker works properly .
Carefully lift the device out of the box .
Z Z
Be sure that the following information is included on the serial label
Z Z
located on the back of the unit:
• Serial Number
• Product Number
• Electrical Rating
Ensure that the power cord has a pin configuration that fits into a wall
Z Z
socket according to the local standard .
Should any kind of damage have occurred during transportation, contact
the carrier immediately . The carrier is responsible for shipping damage .
3.2 Selecting the Location
Put the rocker on a horizontal, leveled, and stable surface
Z Z
Leave enough space around the rocker for normal air circulation (10 cm
Z Z
minimum)
Leave enough space around the rocker for easy access and maintenance
Z Z
Avoid locations subject to shocks and vibrations
Z Z
Avoid locations subject to frequent power fluctuations or power losses,
Z Z
as this may affect rocker performance
Select a location that is dry and not subject to drafts or moving air from
heating or air conditioning vents or air blown by other equipment . Place
the unit on a flat, preferably non-flammable, surface . Allow sufficient
room around the unit for access and cooling (six inches minimum on all
sides is suggested) . Plug the unit into a properly grounded outlet . Using
the lifter, insert the block(s) into the well . The unit is now ready for use .
Instruction Manual
5