HIKVISION DS-8100-S Series Skrócona instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla DVR HIKVISION DS-8100-S Series. HIKVISION DS-8100-S Series 6 stron.
Również dla HIKVISION DS-8100-S Series: Skrócona instrukcja obsługi (6 strony), Instrukcja instalacji (4 strony), Instrukcja instalacji (4 strony), Skrócona instrukcja obsługi (7 strony)

Drukuj stronę
HIKVISION DS-8100-S Series Skrócona instrukcja obsługi
Q ui c k S t a rt G uide
DS-7300HI-S Series DVR

Using the Front Panel Controls

The controls on the front panel include:
1.
USB Ports: Universal Serial Bus (USB) ports for additional devices such as USB mouse and
USB Hard Disk Drive (HDD).
2.
Status Indicators: Status indicators for different features of the DVR.
•
Alarm: Alarm indicator turns red when a sensor alarm is detected.
•
Ready: Ready indicator turns green when DVR is functioning properly.
•
Status: Status indicator turns green when DVR is controlled by an IR remote.
•
HDD: HDD indicator blinks red when data is being read from or written to HDD.
•
Tx/Rx: Tx/Rx indictor blinks blue when network connection is functioning properly.
3.

Control Buttons:

•
MENU/WIPER Button: Pressing the MENU/WIPER button will return the user to the Main
menu (after successful login). Pressing and holding the button for 5 seconds will turn off
audible key beep. In PTZ Control mode, the MENU/WIPER button will start wiper (if
applicable). In Playback mode, it also can be used to enable/disable side bar menu.
•
F1/LIGHT: In PTZ Control mode, it will turn on/off PTZ light. In PTZ Control mode, the
F1/LIGHT button is used to zoom the PTZ camera in when in the PTZ Control menu.
•
F2/AUX: It is used to cycle through tab pages. In PTZ Control mode, the F2/AUX button is
used to zoom the PTZ camera out when in the PTZ Control menu.
•
ESC: The ESC button is used to escape to the previous menu and to arm/disarm the DVR in
Preview mode.
•
EDIT/IRIS+: The EDIT/IRIS+ button is used to edit text fields. When editing text fields, it
will also function as a Backspace button to delete the character in front of the cursor. On
5