KitchenAid KHTU100 Series Instrukcje instalacji oraz instrukcja obsługi i konserwacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcje instalacji oraz instrukcja obsługi i konserwacji dla Okap wentylacyjny KitchenAid KHTU100 Series. KitchenAid KHTU100 Series 20 stron. Khtu100/khtu160 series 30" (76.2 cm) and 36" (91.4 cm) traditional series vented and non vented range hoods
Również dla KitchenAid KHTU100 Series: Instrukcje instalacji oraz instrukcja obsługi i konserwacji (20 strony), Instrukcje instalacji oraz instrukcja obsługi i konserwacji (20 strony), Instrukcje instalacji oraz instrukcja obsługi i konserwacji (20 strony)

KitchenAid KHTU100 Series Instrukcje instalacji oraz instrukcja obsługi i konserwacji
Care of range hood
Filters: For best results, remove
and clean aluminum filters often.
Filters can be cleaned in a
dishwasher or with hot sudsy
water.
Do not wash charcoal filters used
with non-vented (recirculating)
installations. Charcoal filters can
be replaced by ordering Kit Part
No. 4396273, available from your
dealer.
deflector
KITCHENAID
For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or
furnished with the product, KitchenAid or KitchenAid Canada (hereafter "KitchenAid") will pay for factory specified parts and repair
labor to correct defects in materials or workmanship. Service must be provided by a KitchenAid designated service company.
1. Service calls to correct the installation of your major appliance, to instruct you how to use your major appliance, to replace or repair
house fuses or to correct house wiring or plumbing.
2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Those consumable parts are excluded from warranty
coverage.
3. Repairs when your major appliance is used for other than normal, single-family household use.
4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in
accordance with electrical or plumbing codes, or use of products not approved by KitchenAid.
5. Replacement parts or repair labor costs for units operated outside the United States or Canada.
6. Pickup and delivery. This major appliance is designed to be repaired in the home.
7. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
8. Expenses for travel and transportation for product service in remote locations.
9. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in accordance with
published installation instructions.
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED
HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. KITCHENAID SHALL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE
TO PROVINCE.
Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized KitchenAid dealer to determine if
another warranty applies.
If you need service, first see the "Troubleshooting" section of the Use & Care Guide. After checking "Troubleshooting," additional help
can be found by checking the "Assistance or Service" section or by calling KitchenAid. In the U.S.A., call 1-800-422-1230. In Canada,
call 1-800-807-6777.
To remove filters: Pull the
deflector down. Push the handles
toward the back of the hood and
pull down.
To reinstall filters: Insert filters
into back of hood; push up into
place while pushing back on
handles. Release handles.
Replacing lights:
Use a Phillips screwdriver to
remove screw holding the light
®
VENTILATION WARRANTY
ONE YEAR LIMITED WARRANTY
ITEMS KITCHENAID WILL NOT PAY FOR
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
remove screw
lens cap. Remove the bulb and
replace with a 40W, E17 sfera,
120-volt type bulb. Reinstall light
lens.
Cleaning grease collection cup:
Twist cup counterclockwise to
remove. Wash in hot sudsy water.
Dry, insert into opening and twist
clockwise.
Exterior surfaces: Clean with a
mild detergent and soft cloth. DO
NOT use abrasive cleaners or
steel wool.
grease
collection
cup
10/05
7