Fronius RC Panel Pro Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System spawania Fronius RC Panel Pro. Fronius RC Panel Pro 12 stron.
Również dla Fronius RC Panel Pro: Instrukcja obsługi (16 strony), Instrukcja obsługi (8 strony)

Drukuj stronę

General

Safety

Device Concept

The remote control has the same functionality as the power source's control panel. A pre-

cise description of the possible settings can be found in the power source's Operating In-

structions.

Scope of Supply

Technical data

Notes on Radio

The device is equipped with a wireless module.

Certification

Wireless modules in the USA require FCC certification:

WARNING! Incorrect operation and incorrectly performed work can cause seri-

ous injury and damage to property. All work listed in this document may only be

performed by trained specialist personnel. All functions described in this docu-

ment may only be used by trained specialist personnel. All work and functions de-

scribed may only be performed and used once the following documents have

been read and understood in full:

This Document

All Operating Instructions for system components, especially the safety rules

NOTE! To be able to use the remote control, the welding system must have a

TPS/i power source.

NOTE! Because of firmware updates, certain functions may be available that are

not described in these Operating Instructions or vice versa.

Supply voltage

Protection class

Marks of conformity

Dimensions (l x w x h)

(1)

Remote control

(2)

TPS/i Key Card

(3)

This document

(1)

(2)

(3)

+ 24 V DC

IP 44

CE, FCC

260 x 220 x 60 mm

10.24 x 8.66 x 2.36 in.