Fronius TransPocket 150 RC/EF Procedura aktualizacji - Strona 7

Przeglądaj online lub pobierz pdf Procedura aktualizacji dla System spawania Fronius TransPocket 150 RC/EF. Fronius TransPocket 150 RC/EF 7 stron.

15) Press ok and close the Service Tool. Upload finished!

!! Perform a reboot (switch OFF & ON) at least twice after the update!!

1) With the following steps you can check the Software update direct on the power source.

After this steps you should see the uploaded version of the software on the display

09/2018

7/7