ALIGNER CCD2.0WIFI Instalacja i instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Instalacja i instrukcja obsługi dla Sprzęt testowy ALIGNER CCD2.0WIFI. ALIGNER CCD2.0WIFI 16 stron.

Legend of the Figure 22:

1 ‐

Detectors calibrated in the current phase

Current calibration phase

3 ‐

Calibration phases already acquired

4 ‐

Angle calibrated in the current phase with the relative tolerance

5 ‐

Currently read angular value

6 ‐

Graphical description of the positioning of the detectors on the stand

7‐

Keys used to perform the calibration phase (F5 or the central key on the detector); it is shown and

flashes when it can be pressed.

Press F5 to store the values and then F4 to continue to the next phase.

ATTENTION: the rear transmission always passes through the front ones.

Page 12/14

Figure 22

When

sensors (phases 7 and 8) it is

necessary to position the front

sensors in correspondence, so

that data transmission passes

through them.

Figure 23

Cod. R0368 ‐ rev.1.0

calibrating

the

R0368

(03/2020)

rear