Garmin GNC 420 Dodatek do podręcznika pilota - Strona 11

Przeglądaj online lub pobierz pdf Dodatek do podręcznika pilota dla Wyświetlacz awioniki Garmin GNC 420. Garmin GNC 420 22 stron. 400/500 series gts 8xx interface
Również dla Garmin GNC 420: Instrukcja obsługi (6 strony), Dodatek do podręcznika pilota (27 strony), Dodatek do podręcznika pilota (4 strony), Skrócona instrukcja obsługi (17 strony), Skrócona instrukcja obsługi (23 strony), Podręcznik operacyjny pilota (8 strony)

1.6

USeR-INITIATeD TeST

In addition to the power-up test, the GTS 8XX performs self-tests during normal

operation. A self-test is performed once per minute to verify that the antenna is

connected. Also, a calibration is performed at varying intervals based on time and

temperature. A user-initiated test of the GTS 8XX interface can also be performed.

The test criteria are identical to the power up self-test, although the user-initiated test

is concluded by an aural pass/fail message.

NOTE: A user-initiated test can only be performed when in standby or failed

mode.

Performing a user-initiated test:

Turn the small right knob to select the Traffic Page.

From the Traffic Page, press the MENU Key to display the Page Menu.

Turn the small right knob to select 'Self Test?'.

Press the ENT Key, 'TEST' is displayed.

190-00140-78 Rev. A

Figure 2 Standby Mode

Figure 3 Self-Test Mode

400/500 Pilot's Guide Addendum for GTS 8XX Interface

GTS 8XX Interface

Test-Mode

Indication